Sale!

Suntaiho Tempered Glass for Samsung Galaxy S10 S10plus S10E UV Liquid full Glue for Samsung S8 9 plus Note 8 9 Screen Protector

$10.68$11.92

China
for Galaxy note8for Galaxy note9For Galaxy S10for Galaxy S10 EFor Galaxy S10 PlusFor Galaxy S7 edgeFor Galaxy S8For Galaxy S8 PlusFor Galaxy S9For Galaxy S9 Plus
Clear
SKU: 33036757965 Category:

Description

Notice :
1.after install the protector please use the lamp to dry the glass about 3 minutes , it is very important
2.the transparent glass is case friendly style,can't cover the whole screen, please pay attention to it
3.the glass can be removed , but you must make sure to use the lamp to dry the glass enough about 3 minutes when you install the protector, otherwise the glass is not easy to remove!!
how to install this protector :
1. Use a foil cleaning kit to wipe the phone to be clean.
2 .Place the sticker over the hole in the handset. Stick the key hole with a label.
3 .Place custom glue drops on flat, clean and dust-free glass screens. Use each glue to use. It is recommended that the glue be poured completely. The excess glue can be wiped clean before turning on the lights. The glue can only be a mass and cannot be separated. Drops on the screen.
4 .The glue that drops on the screen can't have air bubbles, if there is air bubble, use the needle to pierce the air bubble to let go air.
5 .Remove the release film from the protective film and place the glass on the screen so that the glass contacts the glue and gently translate the glass to a suitable position. Do not lift the glass and allow the glass to separate from the glue (very important).
6 .Wait for about 30 seconds to let the glue slowly spread and level.
7. There is glue overflow, wipe off with a clean cloth. After checking the retention criteria for the mobile phone's tempered film, the lamp was turned back and forth three times around the edge of the phone, and after 3 seconds of initial curing (not in the middle), the edge glue was wiped again until the glue overflowed. (Prevent white edges or long bubbles on edges)
8. Wait for the exhaust to complete, after the glue overflows cleanly, after the positioning standard of the tempered film is satisfied, turn on the light. Otherwise scrapped material.
9. Irradiate the mobile phone under UV light and need to illuminate twice for about 3 minutes to reach the fully-cured position.

<&lt

Additional information

Brand Name

Suntaiho

Edge-to-edge Coverage

Yes

Type

Front Film

Compatible Phone Brand

Samsung

Compatible Samsung Model

Galaxy Note 9

Use

Mobile Phone

Material

Nano Liquid full Glue Tempered Glass

Edge Radian

3D

Transparency

99%

Feature

Anti-scratch, Fingerprint-resistant

Feature1

HD, Ultra-thin, Waterproof

Compatible phone

Tempered Glass for Samsung Galaxy note8 Nano UV Liquid fully adsorbed

Compatible phone1

Tempered Glass for Samsung Galaxy S8 plus Nano UV Liquid fully ad

Compatible phone2

Tempered Glass for Samsung Galaxy S9 plus Nano UV Liquid glass

Compatible phone3

Tempered Glass for Samsung Galaxy note9 Nano UV Liquid glass

Compatible phone4

Tempered Glass for Samsung Galaxy S10plus Nano UV Liquid glass

Compatible phone5

Tempered Glass for Samsung Galaxy s10 Nano UV Liquid glass

Compatible phone6

Tempered Glass for Samsung Galaxy S10E Nano UV Liquid glass

Reviews

There are no reviews yet.

Be the first to review “Suntaiho Tempered Glass for Samsung Galaxy S10 S10plus S10E UV Liquid full Glue for Samsung S8 9 plus Note 8 9 Screen Protector”

Your email address will not be published. Required fields are marked *